| 1. | Analysis on impedance peak in rl - c parallel circuit
并联电路阻抗极值的分析 |
| 2. | Research on impedance inversion of cross - hole seismic data in time domain
井间地震资料时间域波阻抗反演研究 |
| 3. | Based on impedance match method of " back configuration " , the measurement range of the gauges can be extended to 100 gpa and above
根据“后置”式传感器的阻抗匹配原则，可将待测材料中的压力外推至100gpa以上。 |
| 4. | Based on impedance match method , the measurement range of the gauges can be extended to 100 gpa and above . this range is about 1 time higher than that of exiting manganin gauges
根据阻抗匹配原则，首次使“后置式”传感器的有效量程达到了100gpa以上，比现有传感器的量程上限提高了1倍多。 |
| 5. | An intelligent force / position control strategy based on impedance control was proposed to improve the control performance in robotic deburring process by employing a fuzzy impedance controller and a fuzzy velocity controller
摘要提出了一种面向机器人参与机械加工的智能柔顺控制策略，通过一个模糊阻抗控制器和一个速度控制器，该策略被应用于机器人切除毛刺操作中。 |
| 6. | Based on impedance theory of em wave transmitting in medium , we calculate the reflection of single - layer carbonyl - iron / epoxy ds and discuss the influence of matrix type , carbonyl - iron content and thickness on absorbing properties
此外，根据电磁波在介质中传输的阻抗理论计算了单层羰基铁粉分散体系的反射率，并考虑了不同基体、羰基铁粉含量及体系厚度对反射率的影响。 |
| 7. | For the final dimention of cfa , impedance matrix , near electromagnetic field , and directivity are got directly from the simulation . then based on impedance matrix , input impedance and other relevant parameters of two ports are computed under different excitating conditions in programs of matlab
针对最终模型,首先仿真得到其阻抗矩阵、近区电磁场分布曲线和远区方向图;然后以阻抗矩阵为基础,推导公式、编写程序计算不同激励条件下的端口输入阻抗及其他相关参数。 |
